Specifications

14-35
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Policy Import/Export
Figure 14-19 Policy Sync Receiver (Displays Red Product Banner)
Configure the Receiver
This step consists of authorizing the Master CAM on the Receiver CAM.
Step 1 From the web console of the Receiver CAM, go to Administration > CCA Manager > Policy Sync >
Configure Receiver (Figure 14-20).
Figure 14-20 Configure Receiver
Step 2
Authorize the Master CAM with the following steps:
a. Obtain the DN of the Master CAM as follows:
– Navigate to Administration > CCA Manager > SSL > x509 Certificate on the Master CAM
console