Specifications

14-34
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Policy Import/Export
Figure 14-17 Authorizing the Receiver on the Master CAM
d.
Click the Add button. (To delete a Receiver, you can click the “X” icon in the Action column.)
Note Policy Sync supports a maximum of 10 CAMs or 10 HA-CAM pairs.
Note Authorization must be configured on both the Master and Receiver CAMs for the Master to successfully
push policies and for the Receiver to accept them.
Enable Policy Sync on the Receiver
A CAM configured as a Policy Sync Receiver is distinguished by a red-colored product banner, and
Master CAM settings are disabled for the Receiver CAM. The red banner is intended to warn
administrators not to change any policies on the Receiver CAM for which Policy Sync applies.
Step 1 From the web console of the Receiver CAM, go to Administration > CCA Manager > Policy Sync >
Enable (Figure 14-18).
Figure 14-18 Enabling Policy Sync on the Receiver CAM
Step 2 Click the checkbox for Enable Policy Sync.
Step 3 Click the radio button for Receiver (Allow policy import).
Step 4 Click Update. This sets the current CAM as the Policy Sync Receiver. This labels the CAM as “Policy
Sync Receiver” and changes the color of the web console product banner to red, as shown in
Figure 14-19. It also enables the Configure Receiver page for this CAM and disables the Configure
Master, Manual Sync and Auto Sync pages.