Specifications

14-30
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Policy Import/Export
• After a Policy Sync:
– For the Receiver CAM:
Role A is created and configured with traffic and posture assessment policies from the Master
CAM.
The administrator still needs to map the Agent Login settings to require use of the Agent for
Role A.
Master is configured, Receiver is configured:
• For the Master CAM:
– Role A is configured with traffic and posture assessment policies
– Role A requires use of the Agent for Windows ALL.
• For the Receiver CAM:
– Role A is configured with different traffic and posture assessment policies
– Role A requires use of the Agent for Vista Only.
– Role B is configured
• After a Policy Sync:
– For the Receiver CAM:
Role A is configured with traffic and posture assessment policies from the Master CAM
Role A requires use of the Agent for Vista only.
Role B is removed.
Policy Sync Configuration Summary
Step 1 Before You Start, page 14-30
Step 2 Enable Policy Sync on the Master, page 14-31
Step 3 Configure the Master, page 14-32
Step 4 Enable Policy Sync on the Receiver, page 14-34
Step 5 Configure the Receiver, page 14-35
Step 6 Perform Policy Sync, page 14-36
Step 7 View History Logs, page 14-39
Step 8 Troubleshooting Manual Sync Errors, page 14-41
Before You Start
Step 1 Make sure all CAMs to be used for Policy Sync (Master and Receivers):
• Fulfill the Release 4.5 upgrade requirements and are running release 4.5 (or later)
• Have a properly configured SSL certificate. For production deployments, make sure SSL certificates
are CA-signed.