Specifications

14-25
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 14 Administering the CAM
Licensing
• State after upgrade
It is normal for the “state before upgrade” to contain several warning/error messages (e.g.
“INCORRECT”). The “state after upgrade” should be free of any warning or error messages.
Licensing
The Clean Access Manager and Clean Access Servers require a valid product license to function. The
licensing model for Clean Access incorporates the FlexLM licensing standard.
Note For step-by-step instructions on initially installing the Clean Access Manager license, as well as details
on permanent, evaluation, and legacy licenses, see Cisco NAC Appliance Service Contract / Licensing
Support.
Install FlexLM License for Clean Access Server:
Once the initial product license for the Clean Access Manager is installed, you can use the Licensing
page to add or manage additional licenses (such as CAS licenses, or a second CAM license for
HA-CAMs).
1. Go to Administration > CCA Manager > Licensing.
Figure 14-13 Licensing Page
2.
In the Clean Access Manager License File field, browse to the license file for your Clean Access
Server or Server bundle and click Install License. You will see a green confirmation text string at
the top of the page if the license was installed successfully, as well as the CAS increment count (for
example, “License added successfully. Out-of-Band Server Count is now 10.”).