Specifications

13-17

Cisco NAC Appliance - Clean Access Manager Configuration Guide

OL-28003-01

Chapter 13 Monitoring Event Logs

SNMP on Individual CAS

The configuration settings in Enable SNMP Polling/Alerts, page 13-13 are applied to all the Clean

Access Servers connected to the Clean Acces Manager. If you want to change the configuration settings

for one of the Clean Access Servers, you can specify the settings in the corresponding CAS, using any

one of the following:

• In the CAS web console, navigate to Administration > SNMP and modify the configuration. Refer

to the Cisco NAC Appliance - Clean Access Server Configuration Guide, Release 4.9(x) for more

details.

[OR]

• In the CAM web console, go to Device Management > CCA Servers > Manage [CAS_IP] >

Advanced > SNMP and modify the configuration as described in the following procedure:

Step 1 Go to Device Management > CCA Servers > Manage [CAS_IP] > Advanced > SNMP to bring up the

SNMP configuration page (Figure 13-6).

Figure 13-6 Device Management > CCA Servers > Manage [CAS_IP] > Advanced > SNMP Page

Step 2

Check the Override Global Settings checkbox and click Update to override the configuration settings

that have been already specified in the Monitoring > SNMP page.

Step 3 Click the Enable button preceding SNMP on NAC Servers to activate the SNMP polling and SNMP

traps.