Specifications

12-22
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 12 Configuring Network Scanning
Customize the User Agreement Page
Figure 12-18 User Agreement Page (Quarantine Role Example)
Note The page content (“Virus Protection Information”) shown in Figure 12-18 is the default content shown
to the end user, if no other information message or URL is specified for the User Agreement Page. Note
that this default content is not displayed in the Information Page Message (or URL) text area of the
configuration form.
The configuration form (shown in Figure 12-17) can be used to set up the following types of pages for
a web login user:
• After network scanning with no system vulnerabilities found—Users see the User Agreement Page
configured for the normal login role (Accept and Decline buttons).
• After web login and network scanning with client system vulnerabilities found—
– Users are put in a quarantine role and see the User Agreement Page of the quarantine role
(Report and Logout buttons).
– Users are put in a quarantine role but see the User Agreement Page of their normal login role
(Report and Logout buttons).
Before starting, create the HTML page that you want to use for the Information Page Message (or
URL) component. Cisco NAC Appliance lets you present a specific information page to users with a
particular role or operating system. The customized page should be on a web server accessible to Cisco
NAC Appliance elements.
After configuring the User Agreement Page, you will need to create a traffic policy to enable users in the
role access to the web resources of the page. Note that the role must grant access to port 80 of the CAM.
See Chapter 8, “User Management: Traffic Control, Bandwidth, Schedule” for details.
To customize the User Agreement Page:
1. Go to Device Management > Clean Access > Network Scanner > Scan Setup > User Agreement
Page. The configuration form for the User Agreement Page appears as shown in Figure 12-17.