Specifications

11-25
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 11 Monitoring and Troubleshooting Agent Sessions
Report Settings
Format—Select the format of the output report file. The options available are HTML and PDF.
After selecting the Report Type, Report Format, and Filter, you can perform the following actions:
• Click Generate Report to generate and view the report immediately.
• Click Reset to remove the filters.
• Enter a name for the report and click Save Template As to save the current settings as a template.
Scheduling Report Generation
You can schedule to generate a report in future by setting up the date and time.
• Start Date—Enter the date on which the report generation has to start.
• Time—Enter the time at which the report generation has to start.
• Frequency—Select the frequency of the report generation from the drop-down list. The options
available are: One Time, Hourly, Daily, Weekly, and Monthly.
Once you select the above parameters, click the Schedule button and the following are displayed:
• Report Type
• Format
• Frequency
• Next scheduled run
The reports are generated with the currently selected Report Type and the Report Format at the scheduled
time. The previously generated reports are displayed at the bottom of the page.
Note A maximum of 500 reports are displayed under the Reports Previously Generated section.
Role Specific Reports
(Select the Role from the
dropdown that appears
when you select this
option)
Login status, User,
Client IP, Requirement
For each record, a link
is available to view the
failed and passed
requirements, and the
requirements in Audit /
Mandatory / Optional
mode.
Sys Name, Login Time,
MAC Address,
Requirement Status,
Report time
All the default and
optional fields
Controlled Switch Ports
2
Switch IP, Port Name,
User IP
Port Number, Port
Description, Port
Profile, User MAC
Address, User Name
All the default and
optional fields
1. Mandatory fields would always be part of the generated report.
2. The report is generated only when there is a maxiumum of 50 switches are available. If you have more than 50 swicthes in the
network, flter the report by using the Switch IP field.
Table 11-2 Report Types and the Fields Included (continued)
Report Type Mandatory Fields
1
Optional Fields Filter-by Fields