Specifications

11-17
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 11 Monitoring and Troubleshooting Agent Sessions
Manage Certified Devices
Figure 11-13 Floating Devices
Note For VPN concentrator/multihop L3 deployment, administrators must add the MAC address of the
router/VPN concentrator to the Floating Device list (example entry: 00:16:21:11:4D:67 1
vpn_concentrator). See “Integrating with Cisco VPN Concentrators” in the Cisco NAC Appliance -
Clean Access Server Configuration Guide, Release 4.9(x).
To configure a floating device:
1. Go to Device Management > Clean Access > Certified Devices > Add Floating Device.
2. In the Floating Device MAC Address field, enter the MAC address. Type the entry in the form:
<MAC> <type> <description>
Where:
– <MAC> is the MAC address of the device.
– <type> is either:
0 for session-scope certification, or
1 if the device should never be considered certified
– <description> is an optional description of the device.
Include spaces between each element and use line breaks to separate multiple entries. For example:
00:16:21:23:4D:67 0 LibCard1
00:16:34:21:4C:68 0 LibCard2
00:16:11:12:4A:71 1 Router1
3. Click Add Device to save the setting.
To remove a floating device, click the Delete icon for the MAC address.