Specifications

11-15
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 11 Monitoring and Troubleshooting Agent Sessions
Manage Certified Devices
Figure 11-12 New Certified Devices Timer
Step 3
Type a Timer Name for the timer.
Step 4 Type an optional Description of the timer.
Step 5 Click the checkbox for Enable this timer to apply the timer right away after configuration.
Step 6 Click the checkbox for Keep Online Users if you only want to remove client devices from the Certified
Devices List without removing the users from the network.
Step 7 Click the checkbox On timer clear to set the users to remain in Access VLAN or move to Auth VLAN.
From the drop-down, choose Retain in Access vlan to remove the users from CDL and remain in Access
VLAN. You can choose Change to Auth vlan to remove the users from CDL and to move the users to
Auth VLAN. This option is available starting from Cisco NAC Appliance Release 4.9(3).
Step 8 Type the Start Date and Time for the timer, using format: YYYY-MM-DD hh:mm:ss. The Start Date
and Time sets the initial date and time for this timer to clear the Certified Devices List.
Step 9 Type a Recurrence in days to set the repeat interval for this timer. For example, a Recurrence of 7 will
clear the Certified Devices List 7 days after the initial clearing and at the same Start Time specified.
Typing 0 will clear the Certified Devices List only once.
Step 10 Choose from any of the dropdown menus to apply this timer by the following Criteria:
a. Clean Access Server: Apply this timer to Any CCA Server (default) or to a specific CAS by IP
address.
b. User Role: Apply this timer to Any User Role (default) or to a specific system user role
c. Provider: Apply this timer to Any Provider (default) or to a specific system Auth Provider (Local
DB or any other)