Specifications

11-13
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 11 Monitoring and Troubleshooting Agent Sessions
Manage Certified Devices
Figure 11-10 Clean Access Certified Devices List
Clear Certified or Exempt Devices Manually
To clear device MAC addresses, go to Device Management > Clean Access > Certified Devices >
Certified Devices List and click:
• Clear Exempt to remove only the MAC addresses that were added manually with the Add Exempt
button.
• Clear Certified to remove only the MAC addresses that were added automatically by the Clean
Access Server.
• Clear All to remove MAC addresses of both exempt and certified devices.
Remove individual addresses individually by clicking Delete next to the MAC address.
View Reports for Certified Devices
You can view the results of previous Agent scans for certified devices under Device Management >
Clean Access > Clean Access Agent > Reports. Click the View icon to see which requirements, rules,
and checks succeeded or failed for an individual client. See View Scan Reports, page 12-17 for details.
You can view the results of previous network scans for certified devices at any time from Device
Management > Clean Access > Network Scanner > Reports. Click the Report icon to see an
individual scan report. See View Scan Reports, page 12-17 for details.
View Switch/WLC Information for Out-of-Band Certified Devices
For Out-of-Band users only, the Certified Devices List (Figure 11-10) populates the Location column
with a the IP address and specific port on the Out-of-Band switch, or (in the case of a Wireless LAN
controller) the IP address and SSID for the specific Out-of-Band WLC.
For further details on OOB clients, see:
• Chapter 3, “Switch Management: Configuring Out-of-Band Deployment” and Out-of-Band Users,
page 11-31
• Chapter 4, “Wireless LAN Controller Management: Configuring Wireless Out-of-Band
Deployment”