Specifications

11-2
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 11 Monitoring and Troubleshooting Agent Sessions
Viewing Agent Reports
Figure 11-1 Agent Administrator Report
The Reports page also enables you to filter the list of user session reports by activating and defining
additional client report display criteria. For example, if you have a very large user access base where
users log in every day (even multiple times per day) and you want to limit the number of reports to a
more manageable total, you can choose to display user session information for a single user ID or all
user sessions from a specific device. The filter parameters available in the dropdown menu are:
• Status—Allows you to list either successful or unsuccessful, or both types of user sessions
• Username—Allows you to specify all or part of a specific user ID to display in the client report list
• Agent—Allows you to select the type of Cisco NAC Appliance Agent
• Type—Allows you select the type of the posture by which the client has got access to the NAC
Appliance (Login or Passive Re-assessment)
• IP—Allows you to limit the list of client reports to match all or part of a specified IP address (you
could use this parameter to limit the user list to only IP addresses in the 10.12.4.<x> range by
specifying “starts with” “10.12.4.”, for example)
• MAC—Allows you to limit the list of client reports to match all or part of a specified source MAC
address
• OS—Allows you to display client reports based on the operating system detected on the client
machine
• Time—Allows you to display client report entries either since or before a point in time (like within
the last hour or before the last day, for example)
• Software—Allows you to display client reports for specific installed AntiVirus, Antispyware,
and/or any Unsupported AV/AS software
• Requirement—Allows you to display only client reports associated with a specific Agent
requirement
• Requirement Status—Allows you to display client reports for successful or unsuccessful Agent
requirements for the specified Requirement (above)
• System Name—Allows you to display client reports associated with all or part of a specific client
system name
• System User—Allows you to display client reports associated with a specific system user (that is,
the user logged in to the client machine at the time the actual user session was initiated, which is not
necessarily the same ID as the Username, above)