Specifications

1-19

Cisco NAC Appliance - Clean Access Manager Configuration Guide

OL-28003-01

Chapter 1 Introduction

Client Posture Assessment Overview

For additional information on redirecting users by role to specific pages or URLs (outside of Cisco NAC

Appliance), see Create Local User Accounts, page 6-15.

For additional Cisco NAC Appliance configuration information, see Configure General Setup,

page 12-9.

For additional details on configuring Agent Requirements, see Configuring Agent-Based Posture

Assessment, page 9-39.

For complete details, see Chapter 12, “Configuring Network Scanning.”

> Login Page

See User Login Page, page 5-1

for details.

The Login page is configured separately from web pages for

Agent/network scanning, and is the network authentication interface when

using network scanning only. Agent users only need to use it once to

initially download the Agent installation file. Login pages can be

configured per VLAN, subnet and client OS. The user enters his/her

credentials to authenticate, and the CAM determines the user’s role

assignment based on local user/user role configuration.

Logout Page

(web login

users only)

User Management > User

Roles > New Role or Edit Role

See Specify Logout Page

Information, page 5-16 for

details.

The Logout page appears only for users that use web login to authenticate.

After the user successfully logs in, the Logout page pops up in its own

browser and displays user status based on the combination of options you

select.

Note Users (especially users in a quarantine role) should be careful not

to close the Logout page to be able to log themselves out instead

of having to wait for a session timeout.

Table 1-3 Web Login User Page Summary (continued)

Page Configured in: Purpose