Manualshelf

Specifications

ManualsBrandsHP ManualsComputer equipment3350 - Cisco NAC Appliance
411412413414415416417418419420
9-105
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 9 Configuring Cisco NAC Appliance for Agent Login and Client Posture Assessment
Post-Configuration and Agent Maintenance on the CAM
Uninstall Cisco NAC Agent
The Agent installs to C:\Program Files\Cisco\Cisco NAC Agent\ on the Windows client. You can
uninstall the Agent in the following ways:
• By double-clicking the Uninstall Cisco NAC Agent desktop icon
• By going to Start Menu > Programs > Cisco Systems > Cisco Clean Access > Uninstall Cisco
NAC Agent
• By going to Start Menu > Control Panel > Add or Remove Programs > Cisco NAC Agent
Note To change the version of the Agent on the CAM, see Manually Uploading the Agent to the CAM,
page 9-100.
To uninstall Cisco NAC Agent in a Windows 8 client, execute the following:
Step 1 Switch to Metro Mode.
Step 2 Right-Click Cisco NAC Agent tile.
Step 3 Select Un-Install from the options available at the bottom of the screen.
Step 4 The system automatically switches to Desktop mode and opens Add/Remove control panel.
Step 5 In the Add/Remove control panel, perform one of the following:
• Double Click Cisco NAC Agent.
• Select Cisco NAC Agent and click Uninstall.
• Right Click Cisco NAC Agent and select Uninstall.
Uninstall Windows Clean Access Agent
The Agent installs to C:\Program Files\Cisco Systems\Clean Access Agent\ on the Windows client. You
can uninstall the Clean Access Agent in the following ways:
• By going to Start Menu > Programs > Cisco Systems > Cisco Clean Access > Uninstall Clean
Access Agent
• By going to Start Menu > Control Panel > Add or Remove Programs > Cisco Clean Access
Agent
Note To change the version of the Agent distributed from the CAM, see Manually Uploading the Agent to the
CAM, page 9-100.
Uninstall Mac OS X Agent
In Mac OS X Agent version 4.8.2.590 and later, you can uninstall the Agent by running the uninstall
script as follows:
Step 1 Open the navigator pane and navigate to <local drive ID> > Applications.
Step 2 Highlight and right-click the CCAAgent icon to bring up the selection menu.