Specifications

9-91
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 9 Configuring Cisco NAC Appliance for Agent Login and Client Posture Assessment
Configuring Agent-Based Posture Assessment
Map Requirements to Rules
Once the requirement is created and the remediation links and instructions are specified, map the
requirement to a rule or set of rules. A requirement-to-rule mapping associates the ruleset that checks
whether the client system meets the requirement to the user requirement action (Agent button,
instructions, links) needed for the client system to comply.
Note The Mac OS X Agent does not support custom checks and custom rules. You can only assign AV and
AS rules to the Link Distribution, Local Check, AV Definition Update, and AS Definition Update
requirement types for Mac OS X posture remediation.
Use the following steps to map a requirement to rules.
Step 1 In the Clean Access Agent tab, click the Requirements submenu and then open the
Requirement-Rules form.
Figure 9-45 Requirement-Rules Mapping
Step 2
From the Requirement Name menu, select the requirement to map.
Step 3 Verify the operating system for the requirement in the Operating System menu. The Rules for Selected
Operating System list will be populated with all rules available for the chosen OS.