Specifications

9-90
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 9 Configuring Cisco NAC Appliance for Agent Login and Client Posture Assessment
Configuring Agent-Based Posture Assessment
b. If you configure the requirement to use automatic remediation, specify the Interval in seconds (the
default interval is 0). Depending on the requirement type, this interval either sets the delay before
the Agent re-attempts remediation or sets the total time allowed for a particular remediation process.
c. Enter the Retry Count []. Specifying a retry count sets a limit on the number of times the Agent
automatically retries the requirement if it initially fails. (The default retry count setting is 0.)
For details on configuring Auto Remediation, see Configuring Auto Remediation for Requirements,
page 9-98.
Note The Cisco NAC Web Agent does not support Auto Remediation.
Step 6 Configure the program to be launched as follows:
a. For the Program Name, choose the root location from which to launch the program from the
dropdown: SYSTEM_DRIVE, SYSTEM_ROOT, SYSTEM_32, SYSTEM_PROGRAMS, or
None, and type the name of the program executable in the adjoining text field.
b. If a more specific path or program parameters are needed, type them in the Program Parameters
text field.
c. Click Add Program. This adds the Program Name and Program Parameters to the sublist of
programs to launch for the requirement.
d. Configure more programs to add, or click the Delete checkbox to remove programs from the list.
Step 7 When done configuring the program or list of programs to added, type the Requirement Name.
Step 8 Type a Description to be displayed to users.
Note Some of the default user messages in the Agent dialogs are very similar between various rules and/or
requirements. To ensure the user clearly understands the remediation issue at hand, Cisco strongly
recommends providing an appropriate message in this field describing the nature and purpose of the
given function.
Step 9 Click the checkbox for the Windows Operating System for which this requirement applies.
Step 10 Click Add Requirement.