Specifications

9-81
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 9 Configuring Cisco NAC Appliance for Agent Login and Client Posture Assessment
Configuring Agent-Based Posture Assessment
Step 6 Click Save Rule.
Step 7 Make sure any requirement based on this rule is also corrected as described in Validate Requirements,
page 9-93.
Create a Custom Requirement
Custom requirements map a specified collection of rules for an operating system to the files, distribution
links, or instructions that you want pushed to the user via Agent dialogs. Custom requirements can point
to installation files or links where software can be downloaded. For local checks not associated with a
specific installation file, the requirement can map the rule to an informational message, for example,
instructing the user to remove software or run a virus check. A new requirement can be created at any
time in the configuration process. However, the requirement must be associated to both a rule for an
operating system and a user role before it can take effect.
Create File Distribution/Link Distribution/Local Check Requirement
Use the following steps to configure a custom requirement.
Step 1 In the Clean Access Agent tab, click the Requirements submenu link and then New Requirement.
Figure 9-38 New Requirement (File Distribution)
Step 2 Select a Requirement Type:
• File Distribution – This distributes the required software directly by making the installation
package available for user download using the Agent. In this case, the file to be downloaded by the
user is placed on the CAM using the File to Upload field. (The maximum file size you can make