Specifications

ManualsBrandsHP ManualsComputer equipment3350 - Cisco NAC Appliance

331

332

333

334

335

336

337

338

339

340

9-25

Cisco NAC Appliance - Clean Access Manager Configuration Guide

OL-28003-01

Chapter 9 Configuring Cisco NAC Appliance for Agent Login and Client Posture Assessment

Setting Up Agent Distribution/Installation

</cfg>

Note If the configuration file consists of any invalid parameter, that parameter will not be updated in the client

machines.

Table 9-1 Customize Cisco NAC Agent Login/Logout Dialog Behavior

Parameter

Default

Value

Valid

Range Description/Behavior

RememberMe 0 0 or 1 If this setting is any value other than 0, the user only

needs to enter login credentials once. The Cisco NAC

Agent also remembers the user credentials after session

termination/time-out.

Note When the user logs out of Windows, the saved

credentials are erased.

When the user moves from a connection that

requires username and password to an SSO

session and returns back, then the credentials

are removed.

AutoPopUp 1 0 or 1

• If this setting is 1, the Cisco NAC Agent login

dialog appears automatically when the user is

logged out.

• If this setting is 0, users must manually initiate

icon on the desktop.

AutoPopUpEnable 1 0 or 1

• If this setting is 1, the Auto PopUp option is

enabled.

• If this setting is 0, the Auto PopUp option is

disabled.

Note When this setting is changed by the user

manually, the client machine should be

rebooted to enable the configuration change. If

the configuration file is pushed to the client

from the CAM, then it is automatically enabled.

ShowMandatoryScreen 0 0 or 1 When mandatory upgrade is configured on the CAM, a

mandatory upgrade window is displayed in the client

machine.

• If this setting is 0, the mandatory upgrade window

that pops up in the client is disabled. The upgrade

will happen without notifying the user.

• If this setting is 1, the mandatory upgrade window

is enabled.