Specifications

8-17
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 8 User Management: Traffic Control, Bandwidth, Schedule
Configure User Session and Heartbeat Timeouts
Configure Session Timer (per User Role)
Step 1 Go to User Management > User Roles > Schedule > Session Timer.
Figure 8-11 Session Timer
Step 2 Click the Edit icon next to the role for which you want to configure timeout settings.
Step 3 Select the Session Timeout check box and type the number of minutes after which the user’s session
times out. The timeout clock starts when the user logs on, and is not affected by user activity. After the
session expires, the user must log in again to continue using the network.
Step 4 Optionally, type a description of the session length limitation in the Description field.
Step 5 Click Update when finished.
Configure Heartbeat Timer (User Inactivity Timeout)
Step 1 Open the Heartbeat Timer form in the Schedule tab.
Figure 8-12 Heartbeat Timer
Step 2
Click the Enable Heartbeat Timer checkbox.
Step 3 Set the number of minutes after which a user is logged off the network if unreachable by connection
attempt in the Log Out Disconnected Users After field.