Specifications

7-15
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 7 User Management: Configuring Authentication Servers
Adding an Authentication Provider
or other user-specific credentials in addition to the standard user ID and password. In this case, one or
more additional login dialog screens may appear as part of the login session. For details, refer to
RADIUS Challenge-Response Cisco NAC Agent Dialogs, page 10-22.
Windows NT
Note • If the CAM is not in the same subnet as the domain controllers, then the CAM DNS settings must
be able to resolve the DCs.
• Currently, only NTLM v1 is supported.
1. Go to User Management > Auth Servers > New.
2. From the Authentication Type dropdown menu, choose Windows NT.
Figure 7-10 Add Windows NT Auth Server
3.
Provider Name—Type a unique name for this authentication provider. Enter a meaningful or
recognizable name if web login users will be able to select providers from the web login page.
4. Domain Name—The host name of the Windows NT environment.
5. Default Role—Choose the user role assigned to users authenticated by this provider. This default
role is used if not overridden by a role assignment based on MAC address or IP address.
6. Description—Enter an optional description of this auth server for reference.
7. Click Add Server.