Specifications

5-3
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 5 Configuring User Login Page and Guest Access
Add Default Login Page
• Proxy server IP address and port pair (for example, 10.10.10.2:80) — this is useful in environments
where the IP and port of the proxy server to be used are known (e.g. corporate/enterprise).
Note Proxy settings are local policies configured on the CAS under Device Management > Clean Access
Servers > Manage [CAS_IP] > Advanced > Proxy. For complete details, see the Cisco NAC Appliance
- Clean Access Server Configuration Guide, Release 4.9(x).
See also Proxy Servers and Host Policies, page 8-12 for related information.
Add Default Login Page
A default login page must be added to the system to enable users to log in. For initial testing, you can
follow the steps below leaving all default settings (*) to add a default login page. You can later define
specialized login pages for target subnets and user operating systems. The following steps describe how
to add a login page to the Clean Access Manager for all Clean Access Servers.
1. Go to Administration > User Pages > Login Page.
2. Click the Add submenu link.
3. Specify a VLAN ID, Subnet (IP/Mask), or Operating System target for the page. To specify any
VLAN ID or subnet, use an asterisk (*) in the field. For any OS, select ALL.
Note While choosing the Operating System, select MAC_OSX for Mac OS X client machines and
select MAC_ALL for other devices like iPhones running iOS.
Figure 5-1 Add Login Page
4.
Click Add.
5. The new page will appear under Administration > User Pages > Login Page > List.