Specifications

4-26
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
• Device Profile—Shows the Device Profile you are using for this WLC configured under OOB
Management > Profiles > Device. The WLC Device Profile sets the model type, the SNMP port on
which to send SNMP traps, SNMP version for read and write and corresponding community strings,
or authentication parameters (SNMP V3 Write).
• Description—Optional description of the WLC. To change this field, type a new description and
click Update.
Group
This page displays all the Group Profiles configured in the Clean Access Manager, and the Group
Profiles to which the WLC currently belongs. You can add the WLC to other Groups, or you can remove
the WLC from a Group Joined. To change the Group membership for all switches, go to OOB
Management > Profiles > Group (see Configure Group Profiles, page 4-14).
Figure 4-22 Config > Group
View Wireless Out-of-Band Online Users
When Out-of-Band is enabled, the Monitoring > View Online Users page displays links for both
In-Band and Out-of-Band users and display settings (Figure 4-23). See Out-of-Band Users, page 11-31
for details.
Figure 4-23 View Out-of-Band Online Users