Specifications

4-25
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
– AP MAC—The MAC address of the WLC Access Point through which the client is accessing
the network
– Auth VLAN—Authentication (Quarantine) VLAN
A value of “N/A” in this column indicates that the VLAN ID for this MAC address is
unavailable from the WLC.
– Access VLAN—Access VLAN of the client
A value of “N/A” in this column indicates the Access VLAN ID is unavailable for the client.
For example, if the user is switched to the Authentication VLAN but has never successfully
logged into Cisco NAC Appliance (due to wrong user credentials), this machine will never have
been assigned to the Access VLAN.
– Last Update—The last time the CAM updated the information of the entry.
See Wireless Out-of-Band Users, page 4-27 for additional details on monitoring Out-of-Band users.
Config Tab
The Config tab allows you to modify Basic and Group profile settings for a particular Wireless LAN
Controller:
• Basic
• Group
Basic
The Basic tab (Figure 4-21) shows the following values configured for the WLC.
Figure 4-21 Config > Basic
•
The first values come from the initial configuration done on the WLC itself:
– IP Address
– MAC Address
– Location
– Contact
– System Info (translated from the MIB for the WLC)