Specifications

4-24
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
Discovered Wireless Clients
Figure 4-20 shows the OOB Management > Devices > Discovered Clients > Wireless Clients page.
The Wireless Clients page lists all clients discovered by the Clean Access Manager via SNMP traps
between the CAM and the WLC. The page records the activities of Out-of-Band clients (regardless of
VLAN), based on the SNMP trap information that the Clean Access Manager receives.
When a client connects to a WLC and is assigned to the Authentication (Quarantine) VLAN, a trap is
sent and the Clean Access Manager creates an entry on the Wireless Clients page. The Clean Access
Manager adds a client’s MAC address, IP address, associated WLC, Access Point MAC address, and
Authentication (Quarantine) and Access VLAN assignments to the Wireless Clients list. Thereafter, the
CAM updates the entry as it receives new SNMP trap information for the client.
Removing an entry from the Wireless Clients list clears this status information for the Wireless OOB
client from the CAM.
Figure 4-20 Wireless Clients
Elements of the page are as follows:
• Show clients connected to WLC with IP—Leave the default of ALL WLCs displayed, or choose
a specific WLC from the dropdown menu. The dropdown menu displays all managed WLCs
configured on the CAM.
• Show client with MAC—Type a specific MAC address and press Enter to display a particular client.
• Clients/Page—Leave the default of 25 entries displayed per page, or choose from the dropdown
menu to displays 50, 100, 200, or ALL entries on the page.
• Delete All Clients—This button removes all clients on the list.
• Delete Selected—This button only removes the clients selected in the check column to the far right
of the page.
• Note that you can click any of the following column headings to sort results by that column:
– MAC—MAC address of discovered wireless client
– IP—IP address of the wireless client
– WLC—IP address of the originating Wireless LAN Controller. Clicking the WLC IP address
brings up the OOB Management > Devices > WLC [IP address] > Config > Basic page for
the WLC. (For more information, see Config Tab, page 4-25.)
– SSID—The service set identifier to which the wireless client has been associated for network
access.