Specifications

4-19
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
SNMP Trap
This page configures settings for the SNMP traps the CAM receives from switches and WLCs. The Clean
Access Manager SNMP Receiver can simultaneously support different versions of SNMP (V1, V2c, V3)
when controlling groups of switches and/or WLCs in which individual devices may be using different
versions of SNMP.
Step 1 Go to OOB Management > Profiles > SNMP Receiver > SNMP Trap (Figure 4-14).
Figure 4-14 CAM SNMP Receiver
Step 2
Use the default Trap Port on Clean Access Manager (162) or enter a new port number here.
Step 3 For SNMP V1 Settings, type the Community String used on switches using SNMP V1.
Step 4 For SNMP V2c Settings, type the Community String used on switches using SNMP V2c.
Step 5 For SNMP V3 Settings, configure the following fields used on switches using SNMP V3:
• Choose the Security Method from the dropdown menu: NoAuthNoPriv, AuthNoPriv(MD5),
AuthNoPriv(SHA), AuthPriv(MD5+DES-CBC), or AuthPriv(SHA+DES-CBC)
• Type the User Name.
• Type the User Auth.
• Type the User Priv
Step 6 Click Update to save settings.
Add and Manage Wireless LAN Controllers
The pages under the OOB Management > Devices > Devices tab are used to discover and add new
switches and WLCs within an IP range, add new switches or WLCs by exact IP address, and manage the
list of associated devices. There are two methods to add new managed WLCs: