Specifications

4-17
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
Figure 4-12 New Wireless LAN Controller Profile
Step 2
Enter a single word for the Profile Name. You can use digits and underscores but no spaces.
Note It is a good idea to enter a WLC name that identifies the model and SNMP read and write versions, for
example “WLC4400v2v3.”
Step 3 Enter the SNMP Port configured on the WLC to receive read/write requests. The default port is 161 for
SNMP GET/SET and the default port is 162 for Traps.
Step 4 Enter an optional Description.
Note You can click the link available at the top of this tab to view the list of supported device models.
Step 5 Configure SNMP Read Settings to match those on the WLC.
• Choose the SNMP Version: SNMP V1, SNMP V2C, or SNMP V3.
• Type the Community String for SNMP V1 or SNMP V2C configured for the WLC.
Step 6 If SNMP V3 is used for SNMP Read Settings on the WLC, configure the following settings to match
those on the switch:
• Choose a Security Method from the dropdown menu: NoAuthNoPriv, AuthNoPriv(MD5),
AuthNoPriv(SHA), AuthPriv(MD5+DES), or AuthPriv(SHA+DES).
• Type the User Name.
• Type the User Auth.
• Type the User Priv.
Step 7 Configure SNMP Write Settings to match those on the WLC.
• Choose the SNMP Version: SNMP V1, SNMP V2C, or SNMP V3.
• Type the Community String for SNMP V1 or SNMP V2C configured for the WLC.