Specifications

4-16
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
Step 4 Click the Update button when done to save your changes.
Note To delete a group profile, you must first remove the joined switches and/or WLCs from the profile.
Configure Wireless LAN Controller Profiles
A WLC profile must first be created under OOB Management > Profiles > Device > New, then applied
when a new WLC is added. A WLC profile classifies WLCs of the same model and SNMP settings, as
shown in Figure 4-11. The WLC profile configures how the CAM learns client Authentication/Access
VLAN assignments from the WLC and when to remove Wireless OOB clients from the Online Users list
for a WLC of that type.
Figure 4-11 Device Profiles List
The Device profiles list under OOB Management > Profiles > Device > List provides three icons:
• Devices—Clicking this icon brings up the list of added devices under OOB Management > Devices
> Devices > List (see Figure 4-15).
• Edit—Clicking this icon brings up the Edit Device profile form (see Figure 4-13).
• Delete—Clicking this icon deletes the Device profile (a confirmation dialog appears first).
Add Wireless LAN Controller Profile
Use the following steps to add a Wireless LAN Controller profile.
Step 1 Go to OOB Management > Profiles > Device > New (Figure 4-12).