Specifications

4-15
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
Add Group Profile
Step 1 Go to OOB Management > Profiles > Group > New (Figure 4-9).
Figure 4-9 New Group
Step 2
Enter a single word for the Group Name. You can use digits and underscores, but no spaces.
Step 3 Enter an optional Description.
Step 4 Click Add. The new Group profile appears under OOB Management > Profiles > Group > List.
Edit Group Profile
Step 1 To edit the profile later, after actual WLCs are added, go to OOB Management > Profiles > Group >
List and click the Edit icon for the new Group profile.
Step 2 The Edit page appears (Figure 4-10).
Figure 4-10 Edit Group
Step 3
You can toggle the WLCs that belong in the Group profile by selecting the IP address of the WLC from
the Member Devices or Available Devices columns and clicking the Join or Remove buttons as
applicable.