Specifications

4-14
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Wireless LAN Controller Connection on the CAM
Figure 4-7 Add New OOB Server
The Clean Access Server itself must be either In-Band or Out-of-Band. The Clean Access Manager can
control both In-Band and Out-of-Band CASs in its domain.
Note You can only deploy CASs supporting wireless client machine authentication in Virtual Gateway mode.
Step 2 Enter the IP address of the Clean Access Server’s eth0 (trusted) interface in the Server IP Address field.
Step 3 (Optional) Enter the Clean Access Server location/description/purpose in the Server Location field.
Step 4 Click Add Clean Access Server.
Configure Group Profiles
When you first add a WLC to the Clean Access Manager’s domain (under OOB Management >
Devices), a Group profile must be applied to add the new WLC. There is a predefined Group profile
called default, shown in Figure 4-8. All WLCs are automatically put in the default group when you add
them. You can leave this default Group profile setting, or you can create additional Group profiles as
needed. If you are adding and managing a large number of WLCs, creating multiple Group profiles
allows you to filter which sets of devices to display from the list of WLCs (under OOB Management >
Devices > Devices > List).
Figure 4-8 Group Profiles List