Specifications

4-10
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 4 Wireless LAN Controller Management: Configuring Wireless Out-of-Band Deployment
Configure Your Wireless LAN Controllers
Step 1 In the WLC graphical user interface, click WLANs > New. The WLANs > New page appears.
Step 2 Choose WLAN from the Type dropdown menu.
Step 3 Enter up to 32 alphanumeric characters for the profile name to be assigned to this WLAN in the Profile
Name field. The profile name must be unique.
Step 4 Enter up to 32 alphanumeric characters for the SSID to be assigned to this WLAN in the WLAN SSID
field.
Step 5 Click Apply to commit your changes. The WLANs > Edit page appears (Figure 4-4).
Figure 4-4 WLC 4400 WLANs > Edit Page
Step 6
On the General tab, check the Status checkbox to enable this WLAN.
Caution Leave this option unchecked (disabled) until you have finished making configuration changes to the
WLAN.
Step 7 On the Advanced tab, check the State checkbox under the “NAC” heading to enable WLC integration
with Cisco NAC Appliance.
Step 8 Specify a Quarantine VLAN ID for wireless user sessions when authenticating with Cisco NAC
Appliance.
Step 9 Click Apply to commit your changes.
Step 10 Click Save Configuration to save your changes.
For more information, refer to the Cisco Wireless LAN Controller Configuration Guide, Release 5.1.
Configure SNMP on the Wireless LAN Controller
To ensure the Wireless LAN Controller is able to receive and process SNMP transmissions from the
CAM regarding OOB client machine status in the Cisco NAC Appliance system, you must enable and
configure SNMP behavior on the WLC.
To create a new SNMP community and enable SNMP on the WLC: