Specifications

3-58
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 3 Switch Management: Configuring Out-of-Band Deployment
Configure OOB Switch Management on the CAM
• Name
Port name, for example: Fa0/1, Fa0/24, Gi0/1, Gi0/21 (for Cisco switches)
• Index
The port number on the switch, for example: 1, 24, 25, 26
• Description
Type of port, for example: FastEthernet0/1, FastEthernet0/24, GigabitEthernet0/1,
GigabitEthernet0/2
• Status
Connection status of the port.
– A green button indicates a device is connected to the port.
– A red button means no device is connected to the port.
• Bounce
Clicking this icon bounces an initialized, managed port. A confirmation appears before the port is
bounced. Note that this feature is only available for managed ports. A port that is connected but not
managed cannot be bounced. By default, this feature is disabled for trunk ports.
• Initial VLAN (Initial VLAN Port Profiles only)
The Initial VLAN value saved by the CAM for this port. This column is only enabled for managed
Port profiles configured with the Initial Port VLAN as the Access VLAN and set to “Change to
Access VLAN if the device is certified and in the Out-of-Band user list” (see Add Port Profile,