Specifications

3-57
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 3 Switch Management: Configuring Out-of-Band Deployment
Configure OOB Switch Management on the CAM
• Save (6)
Click the Save button to save the running configuration into non-volatile memory (startup
configuration) on the switch. Click OK in the confirmation.
Note The VLAN assignment of the port will not be changed in the startup configuration of the switch unless
you click the Save button.
• Update (3)
After you configure managed ports by choosing the applicable Port Profile, you must click the
Update button to save these settings on the CAM. Clicking Update does the following:
– Saves the Profile for the port to the CAM database.
– Saves any Notes for the port to the CAM database.
If the Port profile is configured with the Initial Port VLAN as the Access VLAN and set to “Change
to Access VLAN if the device is certified and in the Out-of-Band user list,” clicking Update also
does the following:
– Saves values in the Initial VLAN column for the port to the CAM database.
– If the Current VLAN value of the port is changed, saves the new VLAN ID for the port to the
running configuration of the switch.
• Show (1)
To limit the range of switch ports displayed in the Ports tab view, you can specify search criteria
using the Search For filtering functions and specify a text string for which to search. You can
specify:
– The information type to search—either the Port Name or Port Description
– The information qualifier—select from equals, starts with, ends with, or contains
– The test string defining the search (like “/11” in our example below)
Once you have specified the search criteria, click Show.