Specifications

3-50
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 3 Switch Management: Configuring Out-of-Band Deployment
Configure OOB Switch Management on the CAM
Step 8 Click the Reset button to reset the form.
Search New Switches
The Search page allows you to discover and add unmanaged switches within an IP range.
Step 1 Go to OOB Management > Devices > Devices > Search (Figure 3-30).
Figure 3-30 Search Switches
Step 2
Select a Device Profile from the dropdown list. The read community string of the selected Device Profile
is used to find switches with matching read settings.
Step 3 Type an IP Range in the text box. Note that the maximum IP range is 256 for a search.
Step 4 By default, the Don’t list devices already in the database checkbox is already checked. If you uncheck
this box, the resulting search will include switches and WLCs you have already added. Note, however,
that the Commit checkboxes to the left of each entry will be disabled for switches that are already
managed.
Step 5 Choose a Device Group from the dropdown to apply to the unmanaged devices found in the search.
Step 6 Choose a Default Port Profile from the dropdown to apply to the unmanaged devices found in the
search.
Step 7 Click the checkbox to the left of each unmanaged device you want to manage through the CAM.
Alternatively, click the checkbox at the top of the column to add all unmanaged devices found from the
search.