Specifications

3-29
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 3 Switch Management: Configuring Out-of-Band Deployment
Configure OOB Switch Management on the CAM
Figure 3-11 Group Profiles List
Add Group Profile
Step 1 Go to OOB Management > Profiles > Group > New (Figure 3-12).
Figure 3-12 New Group
Step 2
Enter a single word for the Group Name. You can use digits and underscores, but no spaces.
Step 3 Enter an optional Description.
Step 4 Click Add. The new Group profile appears under OOB Management > Profiles > Group > List.
Edit Group Profile
Step 1 To edit the profile later, after actual switches are added, go to OOB Management > Profiles > Group >
List and click the Edit icon for the new Group profile.
Step 2 The Edit page appears (Figure 3-13).