Specifications

3-27
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 3 Switch Management: Configuring Out-of-Band Deployment
Configure OOB Switch Management on the CAM
Figure 3-8 Enable VLAN Mapping for Out-of-Band Virtual Gateways
Step 3 If you plan to use role-based port profiles (see Configure Port Profiles, page 3-33), specify the Access
VLAN in the Out-of-Band User Role VLAN field when you create a new user role (Figure 3-9). See
Adding a New User Role, page 6-7 for details.
Figure 3-9 Configure User Role with Access VLAN
Note You can specify a VLAN Name or VLAN ID in the Port Profile or for the Out-of-Band User Role VLAN.
You can specify only numbers for VLAN ID. VLAN Name is case-sensitive, but you can specify
wildcards for a VLAN Name. The switch will use the first match for the wildcard VLAN Name.