Specifications

3-21
Cisco NAC Appliance - Clean Access Manager Configuration Guide
OL-28003-01
Chapter 3 Switch Management: Configuring Out-of-Band Deployment
Configure Your Switches
OOB Network Setup/Configuration Worksheet
Table 3-2 summarizes information needed to configure switches and the Clean Access Manager.
Table 3-2 Configuration Worksheet
Configuration Settings Value
Switch Configuration
Switch IP Address:
Access VLANs:
Auth VLANs:
location_string:
admin_contact_info:
SNMP version used:
SNMP (V1/V2c) read community string:
SNMP (V1/V2c) write community string:
SNMP (V3) auth method/ username/password:
MAC notification or linkup:
SNMP Trap V1/V2c community string, or SNMP Trap
V3 auth method/usr/pwd (to send traps to CAM):
CAM/CAS Configuration
CAM IP address:
CAS Trusted IP address:
CAS Untrusted IP address:
CAM VLAN (management):
CAS VLAN (management):
CAM SNMP Trap Receiver:
Community string for SNMP Trap V1 switches:
Community string for SNMP Trap V2c switches:
Auth method/username/password for SNMP Trap V3
switches: