User guide

EN Removing and replacing the control panel bezel 71
Removing and replacing the control panel bezel
1 Unplug the power cord from the
product. If you have a 220V product,
turn off the power switch.
2 Remove the existing control panel
bezel by lifting up on both sides of
the bezel edges until all the snaps
are disengaged. Set the old bezel
aside.
CAUTION
Be careful not to touch any components
or buttons inside the exposed control
panel area.
3 Align the new bezel at the lower
notch. The bezel notch should align
to the inside of the product.
4 Press down until all the snaps are
engaged, and then press outward
until the bezel is secured.
5 Plug the product in to turn it back on.
If you have a 220V product, turn on
the power switch.
1
2
3
4