User guide

62 Chapter 3 - Maintenance EN
Cleaning the printer
separation pad
If you want to clean the separation pad
rather than replace it, follow the
instructions below:
1 Remove the separation pad as
described in steps 1 through 5 of
“Replacing the printer separation
pad” on page 65.
2 Dab a lint-free cloth in isopropyl
alcohol, and scrub the pad.
WARNING!
Alcohol is flammable. Keep the alcohol
and cloth away from an open flame.
Before you close the product and plug in
the power cord, allow the alcohol to dry
completely.
3 Using a dry, lint-free cloth, wipe the
pad to remove loosened dirt.
4 Allow the pad to dry completely
before you reinstall it in the printer.
To reinstall the pad, see steps 6
through 8 of “Replacing the printer
separation pad” on page 65.
1
4
3
2