User guide

42 Chapter 2 - Operation EN
Fax Send Error
An error occurred while trying to
send a fax.
Try resending the fax.
Try faxing to another fax number.
Check that the telephone cord is
securely connected by
unplugging and replugging the
cord.
Check for a dial tone on the
phone line by pressing
fax/send.
Make sure the phone is working
by disconnecting the product,
plugging in a telephone to the
phone line, and making a voice
call.
Connect the product to a different
phone line.
Fit to Page on
Flatbed Only
Fit to Page does not work when
the ADF is being used.
Use the flatbed or choose
another reduction/enlargement
setting.
Group Dial Not
Allowed In Group
The speed-dial code you entered
is programmed for a group.
Adding a group-dial to another
group-dial is not allowed.
Enter one-touch keys
(programmed as an individual
speed dial) or speed-dial codes
to a group-dial
Group Is Full.
[Fax] To Start
The maximum number of fax
numbers that can be added to an
ad hoc group is 20.
Resend to the ad hoc group
using less fax numbers.
Invalid Date
An invalid date was entered,
such as June 35.
Reenter the date.
Invalid Entry
Invalid data or response. Correct the entry.
Memory Low.
Press [Cancel]
The product memory has been
almost completely filled.
Allow the product to finish the job
or press
cancel to cancel the job.
Memory Low.1 Copy.
Press [Cancel]
The product completed making
one copy. The remaining copies
have been canceled because of
low product memory.
Press
cancel to clear the error.
Use the HP LaserJet Director to
make multiple copies of large
documents, or break the job into
smaller jobs containing fewer
pages.
Memory Low
Only 1 Copy Made
The product does not have
enough memory to complete the
collated copy job.
Reduce job size or copy one at a
time.
Table 10. Control panel error messages (continued)
Message Cause Solution