User guide

234 Chapter 6 - Troubleshooting EN
The table below provides a more detailed description of the NVRAM
PJL factory variables and commands and shows possible settings for
each.
Figure 104. NVRAM PJL factory variables
To use these commands, you need some method to send PJL
commands to the product, either with a software tool or by copying a
file that contains the commands from the host using a DOS box. For
example, from the DOS prompt:
copy /b filename lpt1
Here is an example of a file that uses one of the commands:
ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID
@PJL ‘command’
@PJL RESET
Here is an example of using the NVRAMINIT command:
ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID
@PJL NVRAMINIT
@PJL RESET
NVRAM PJL Variable or Command Possible settings
DEFAULT PAPER
"LETTER", "LEGAL, "A4",
"EXECUTIVE”, "COM10”,
"MONARCH”, "DL”, "C5”, "B5",
"CUSTOM"
DEFAULT LPARM:PCL SYMSET
"ROMAN8", "ISOL1", "ISOL2",
"ISOL5", "PC8", "PC8DN", "PC850",
"PC852", "PC8TK", "WINL1",
"WINL2", "WINL5", "DESKTOP",
"PSTEXT", "VNINTL", "VNUS",
"MSPUBL", "MATH8", "PSMATH",
"VNMATH", "PIFONT", "LEGAL",
"ISO4", "ISO6", "ISO11", "ISO15",
"ISO17", "ISO21", "ISO60", "ISO69",
"WIN30"
DEFAULT OEM “ON”, “OFF”
DEFAULT PRINTPAGECOUNT 0-2147483647
DEFAULT SCANPAGECOUNT 0-2147483647
DEFAULT COPYPAGECOUNT 0-2147483647
CLEARNVRAM None - Command
NVRAMINIT None - Command