User guide

EN Errors 183
No Fax Answer.
Redial Pending
You tried to send a fax, but the
receiving fax line did not answer.
The product attempts to redial
after a few minutes.
Allow the product to retry sending the
fax.
Call the recipient to ensure that the fax
machine is on and ready.
Check that you are dialing the correct fax
number.
Check that the Redial-No Answer option
is enabled.
Unplug the product telephone cord from
the wall, plug in a telephone, and try
making a call.
Plug the product phone cord into a jack
for another phone line.
Try a different phone cord.
If the error persists, check the flat flexible
cable between the LIU and the formatter.
Reseat or replace the cable.
If the error persists, replace the LIU.
No Fax Detected
The product answered the
incoming call but did not detect
that a fax machine was calling.
Allow the product to retry receiving the
fax.
Unplug the product telephone cord from
the wall, plug in a telephone, and try
making a call.
Plug the product phone cord into a jack
for another phone line.
Try a different phone cord.
If the error persists, check the flat flexible
cable between the LIU and the formatter.
Reseat or replace the cable.
If the error persists, replace the LIU.
No Fax Pages
To Reprint
The product attempted to execute
“Reprint Last Fax” when nothing
was in memory.
Receive a fax before attempting to use
this option.
Not Enough
Memory.Try Later
There is not enough memory to
start a new job.
Wait until the current job is finished
before starting a new job.
Out of Range
An invalid number was entered. Correct the entry.
Printer Jam.
Clear Paper Path
The product has detected a jam. Clear the jam. The job should continue to
print. If it does not, try reprinting the job.
If media jams frequently, see Chapter 3,
“Maintenance.”
Printer Mispick
[Enter]To Resume
The print engine has failed to pick
up a piece of media.
Reload the paper in the paper input tray
and press
menu/enter to continue the
job. If the error persists, replace the
printer pickup roller.
Printer Tray Is
Empty.Add Paper
The paper input tray is empty. Load media. If media is already loaded,
remove it. Check for and remove any
jam, and then reload the stack of media
in the paper input tray.
Table 16. Alert and warning messages (continued)
Message Possible causes Solutions