User guide

EN Errors 181
Fax Recv Error
An error occurred while trying to
receive a fax.
Ask the sender to resend the fax.
Try faxing back to the sender or another
fax machine.
Check that the telephone cord is
securely connected by unplugging and
replugging the cord.
Check for a dial tone on the phone line
by pressing
fax/send.
Make sure the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making
a voice call.
Connect the product to a different phone
line.
If the error persists, check the flat flexible
cable between the LIU and the formatter.
Reseat or replace the cable.
If the error persists, replace the LIU.
Fax Send Error
An error occurred while trying to
send a fax.
Try resending the fax.
Try faxing to another fax number.
Check that the telephone cord is
securely connected by unplugging and
replugging the cord.
Check for a dial tone on the phone line
by pressing
fax/send.
Make sure the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making
a voice call.
Connect the product to a different phone
line.
If the error persists, check the flat flexible
cable between the LIU and the formatter.
Reseat or replace the cable.
If the error persists, replace the LIU.
Fit to Page on
Flatbed Only
Fit to Page does not work when
the ADF is being used.
Use the flatbed or choose another
reduction/enlargement setting.
Group Dial Not
Allowed In Group
The speed-dial code you entered
is programmed for a group.
Adding a group-dial to another
group-dial is not allowed.
Enter one-touch keys (programmed as
an individual speed dial) or speed-dial
codes to a group-dial
Group Is Full.
[Fax] To Start
The maximum number of fax
numbers that can be added to an
ad hoc group is 20.
Resend to the ad hoc group using less
fax numbers.
Invalid Date
An invalid date was entered, such
as June 35.
Reenter the date.
Invalid Entry
Invalid data or response. Correct the entry.
Memory Low.
Press [Cancel]
The product memory has been
almost completely filled.
Allow the product to finish the job or
press
cancel to cancel the job.
Table 16. Alert and warning messages (continued)
Message Possible causes Solutions