User guide

EN Printer assemblies 143
3
Remove five screws (callout 1).
Figure 60. Removing the formatter (2 of 3)
4
Rotate the bottom of the formatter up and off of the hooks on the
chassis and begin to remove it. After removing the bottom of the
formatter, disconnect the two flat flexible cables from connectors
at the top of the formatter, and unplug the scanner motor cable
from the formatter (callout 1).
Figure 61. Removing the formatter (3 of 3)
To reinstall
When you reconnect the bottom cable, make sure you lock the ZIF
connector at the bottom of the formatter back into place.
21
2
1