User Guide

Energy saver feature
The monitors support a reduced power state. The reduced power state is initiated if the monitor detects the
absence of either the horizontal sync signal or the vertical sync signal. Upon detecting the absence of these
signals, the monitor screen is blanked, the backlight is turned o, and the power light turns amber. When the
monitor is in the reduced power state, the monitor uses <0.5 W of power. There is a brief warm-up period
before the monitor returns to its normal operating state.
See the computer manual for instructions on setting energy saver features (sometimes called power
management features).
NOTE: The power saver feature works only when the monitor is connected to a computer that has energy
saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter into
the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the monitor
to enter the reduced power state, the power light blinks amber.
Energy saver feature 19