Quick Start Manual

Getting Started 5

FIX= Display precision (the number of digits displayed to the

right of the decimal point). Default is 2.

Key in the number of digits you want and press

or press = until the number of digits you want is

displayed. The display precision can be any number from

0-11. If you specify -1, the calculator displays numbers with

the most appropriate number of digits after the decimal

point. If you find you need to change the FIX setting often,

use the following shortcut:

1. P r e s s

: and release it. Check that the secondary

function annunciator is displayed.

2. Press

: again, and, without releasing it, press a

key, 0-9 that corresponds to the desired FIX setting. FIX

settings for 10 and 11 are not available using this

shortcut. If you press the decimal point,

., instead of

a numbered key, FIX=-1 is selected.

Degree or

Radian

Angular mode in degrees or radians for trigonometric

functions. Default is Degree.

Pressing

I toggles between these options.

Table 1-1 Customizing the Calculator

Display/

Function

Description