Service manual

The Keyboard Assembly
5-5
Figure 5-2 Removing the Keyboard Overlay
A. Overlay notches
5. Using two screwdrivers, place the blade of one screwdriver on the leftmost latch of
the keyboard assembly and push toward the rear of the cardiograph. See Figure 5-3.
Carefully insert the blade of the second screwdriver in a notch to the right or left of
the latch and lift up on the keyboard assembly. The leftmost latch should unlatch.
Repeat with the center and rightmost latches.
Figure 5-3 Removing the Keyboard.
A. Notches
B. Latches