Service manual

PageWriter 100, 200/200i, and 300pi Series Performance Verification Matrix
2-25
Extended Self Test
Function Tests (F) Run Extended Self Test; verify:
•ROM-1
•ROM-X1 (for A05 & A10)
•RAM
•GA
•SIO(for A05 & A10)
• MODEM (for A05 & A10) with
(M1770-87909) test tool attached)
•ROM-2 (for M1770 & M1771)
•ROM-X2 (for A05 & A10)
• NVRAM
•ECG FE
• REMOTE (for future use)
•FLASH1 (for A05 & A10 option)
•FLASH2 (for future use)
"OK" for tests applicable to
the device and the device’s
options
Note: ROM-2 will be "OK"
for A.05.06 or later
F:x
example: F:p
Display test (D)
for M1770A &
M1771
Verify the following patterns:
• all pixels lit to create a black
screen
• no pixels lit to create a white
screen
• scrolling vertical bar from left to
right
No burned pixels, no ran-
dom lines on display, no
permanent patterns at nor-
mal contrast, no LCD
flicker
D:x
example: D:p
Indicator Light Test
(L)
for M1772
Verify:
• indicator lights turn on and off
• all lights flash briefly
All indicator lights are
turned on and off individu-
ally; all lights flash briefly.
L:x
example: L:p
Table 2-10 Performance Verification: PageWriter 300pi/200i/200/100 (M1770A, M1771A, M1772A)
Test Block Name
Test or "Inspection" to
Perform
Expected (Passing)
Test Results
Data to
Record
x=p (pass) or
f (fail)