User Manual

Command View EVA
66 Enterprise Virtual Array 3000 User Guide
Selecting a disk group within the disk groups folder in the Navigation pane
displays the Disk Group Properties page, as shown in Figure 23.
Figure 23: Disk Group Properties page
Working with Disk Groups
The following operations can be performed on a disk group:
■ Creating a disk group—combines physical disk drives into one disk group.
The system automatically selects drives based on their physical locations.
■ Modifying a disk group—changes disk group properties, including the disk
failure protection level, occupancy alarm level, disk group name, or
comments.
■ Adding a new disk to a disk group—adds a new physical disk to a disk group.
■ Deleting a disk group—frees all physical drives contained in that disk group.