Manual

1. Activity
2. Online
3. Fault
Figure 32 Disk drive status ind icators
Removing a disk
CAUTION:
Rotating m
edia can make the disk drive difficult to hand le. To avoid dropping and damaging the disk
drive, wa
it approximately 30 seconds for the media to stop rotating before removing the drive from the
enclosure.
1. Push in the wine-colored ejector push button (1, Figure 33) and pull the release lever (2) down to
the full open position.
2. Pullthediskdrivepartwayoutoftheenclosure(3)andwaitforthemediatostopspinning.
3. When the media has stopped spinning, remove the disk drive from the enclosure.
1
1
0115a
2
3
Figure 33 Removing a disk dr ive
Changing the De v ice Addition Policy
To prevent the storage system from automatically grouping a new disk drive that may have the incorrect
firmware on it, the Device Addition Policy must be checked and set to manual i f necessary:
1. In the Command View Navigation pane, select the storage system.
The Initialized Storage System Properties window opens.
2. Click System Options
3. Select Set system operational policies
4. If the Device Addition Policy is set to Automatic, change it to Manual
Enterprise Virtual Array 3000/5000 user guide
89