Manual

NOTE:
Changing a system password on the controller requires changing the password on any HP Command
View EVA with access to the storage system.
1. Select a unique, eight-character p assword.
2. From the default menus (Storage System Name or World Wide Name) displayed, press
three
times to display System Password.
3. Press
to display Change Password?
4. Press Enter for yes.
The default password, AAAAAA AA ,isdisplayed.
5. Press
or to select the first character.
6. Press
to accep t this character and select the next character.
7. Repeat the process to enter the remaining password characters.
8. Press Enter to enter the password and return to the default display.
Clearing a passwor d
Use the following procedure to remove storage system password protection.
NOTE:
Changing a system password on the controller requires changing the password on any HP Command
View EVA with access to the storage system.
1. Press four times to scroll to the System Password menu.
2. Press
to display Change Password?.
3. Press
to scroll to Clear Password.
4. Press
to display Clear Password.
5. Press
Enter to clear the password.
The Password cleared messagewillbedisplayed.
Setting up a controller pair using the OCP
For information about how to set up a controller pair during initial installation see Setting Up a Controller
Pair Using the OCP.
Power
supply/blower assembly
Two p ower supply/blower assemblies p rovide the necessary operating voltages and cooling to all
controller enclosure components. If o ne power supply/blower assembly fails, the remaining is capable
of operating the enclosure.
Each power supply/blower includes an amber status indicator which will be on if either of the fallowing
con
ditions o ccur:
• The blower is operating at a slow speed or has failed a nd requires replacement.
• The power supply h as failed and requires replacement.
74
Enterprise Virtual Array hardware components