Manual

NOTE:
To exit any menu, press Esc or wait ten seconds for the OCP display to return to the default display.
Table 25 identifies the menu options available within the OCP display.
CAUTION:
Some of the configuration settings available through the OCP impact the operating characteristics of
the storage system. You should not change any setting unless you understand how it will impact system
operation. For more information on the OCP settings, contact your HP-authorized service representative.
Tabl e 25 Menu opt ions wit hin the OCP display
Information
Fault Mana gement Shutdown O pti ons System Password
Port Config
Last Fault
Restart
Change Password
UUID Unique Half
Detail View
Power Off
Clear Password
Controller Versions System Uninitialize Current Password
Debug Flags
Unbypass Loops
Print Flags
Displaying system information
NOTE:
The purpose of this information is to assist the HP-authorized service representative when servicing
your system.
The system information displays show the system configuration including the VCS version, the OCP
firmware and application programming interface (API) versions, and the enclosure address bus
programmable integrated circuit (PIC) confi guration. You can only view, not change, this information.
Displaying versions s ystem information
When you press , the active display is Versions. From the Versions display you can determine the:
• OCP firmw ar e version
• Controller version
• VCS version
NOTE:
The terms PPC, Sprite, Glue, SDC, CBIC, and Atlantis are for development purposes and have no
significance for normal operation.
NOTE:
When viewing the software or firmware version information, pressing
displays the Versions Menu tree.
To display System Information
Enterprise Virtual Array 3000/5000 user guide
71